Did this calculator solve your problem today?

Concrete Driveway Cost Calculator

Estimate total installed pricing, cubic yards of ready-mix concrete, reinforcement materials, and labor per square foot for residential driveways and parking pads.

Dimensions & Slab Specs

Estimated Total Cost
$4,656

Average: $7.27 per sq ft installed.

Concrete Needed
8.69 cu yds

640 sq ft slab (includes 10% spillage buffer).

Itemized Estimate Breakdown

Ready-Mix Concrete (8.7 yds @ $145/yd)$1,260
Compact Gravel Subbase (#57 Stone, 4" depth)$356
Reinforcement (rebar)$480
Labor, Framing, Pouring & Finishing (Standard Broom Finish)$2,560
Total Project Outlay$4,656
Premix Bag Alternative (Small Pours & Patches):
Requires approximately 392 bags (80 lb) or 522 bags (60 lb). For pours over 2 cubic yards, ordering a commercial ready-mix truck is significantly faster and more structurally uniform.

Concrete Driveway Cost Factors & Installation Mathematics

Concrete driveways are engineered structures subjected to thousands of pounds of cyclic wheel loads, thermal expansion, and freeze-thaw cycles. Estimating the true cost requires calculating both material volume and structural foundation layers.

Cubic Yards = (Length in ft × Width in ft × Thickness in ft) ÷ 27 × 1.10

4-Inch vs. 6-Inch Slab Thickness

A 4-inch slab is standard for passenger cars, light SUVs, and residential parking. If your driveway will support heavy pickup trucks, utility trailers, boats, or delivery vehicles, upgrading to a 5-inch or 6-inch slab increases load capacity by over 50% for only a 20% to 25% increase in total material cost.

Frequently Asked Questions

Is a gravel subbase strictly necessary for a concrete driveway?

Yes. Pouring concrete directly onto clay or uncompacted topsoil leads to uneven settlement, water pooling, and premature cracking. A 4-inch compacted gravel base (such as crushed aggregate base or #57 stone) provides crucial drainage and a uniform foundation.

How long before I can drive on a new concrete driveway?

You can walk on fresh concrete after 24 to 48 hours. However, vehicles should remain off the slab for a minimum of 7 full days to allow the concrete to reach approximately 70% of its rated compressive strength (28 days for full cure).

Related Financial Tools

Interconnected calculations to validate your business economics

View all 177 models →