Home/Articles/Home Improvement
Home Improvement

Fence Cost Per Linear Foot [2026]: Material, Posts & Labor Estimation Guide

Complete 2026 fence pricing guide. Compare wood privacy, vinyl, chain link, and aluminum fencing costs per linear foot with post hole concrete and labor rates.

Quick Answer & Key Finding

In 2026, residential fence installation costs average $18 to $42 per linear foot installed, with total costs for a standard 150-linear-foot backyard privacy fence ranging from $2,700 to $6,300. Material costs account for $13 to $34 per linear foot (pressure-treated pine at $16.50/ft, cedar at $24.00/ft, vinyl at $28.50/ft, and ornamental aluminum at $34.00/ft), while contractor labor typically runs $10 to $16 per linear foot. Structural post footings require digging holes 24 to 36 inches deep (below local frost lines) anchored with 1.5 to 2 fifty-pound bags of fast-setting concrete per post.

Interactive Tool

Calculate Your Custom Fence Installation Cost

Input your linear footage, select wood, vinyl, or chain link materials, and get an exact bill of materials with posts, concrete bags, and labor.

Open Fence Cost Calculator

1. Cost Per Linear Foot by Fence Material

Total fencing costs vary primarily by material durability, height (4 ft vs 6 ft vs 8 ft), post spacing, and whether you hire a professional installation crew:

Fence Material TypeMaterial Cost / Linear FtInstalled Cost / Linear Ft (Labor Included)150 Linear Ft Estimate
**Pressure-Treated Pine (6 ft Privacy)**$14.00 to $18.50$24.00 to $32.00$3,600 to $4,800
**Western Red Cedar (6 ft Privacy)**$20.00 to $28.00$30.00 to $42.00$4,500 to $6,300
**Vinyl / PVC Privacy (6 ft)**$24.00 to $34.00$34.00 to $48.00$5,100 to $7,200
**Black Chain Link (4 ft / 6 ft)**$11.00 to $16.00$18.00 to $28.00$2,700 to $4,200
**Ornamental Aluminum (4 ft / 5 ft)**$28.00 to $42.00$38.00 to $56.00$5,700 to $8,400

2. Post Spacing & Concrete Footing Formulas

A fence is only as strong as its below-grade structural posts. Over 85% of fence failures occur due to shallow post footings or unanchored corner posts:

1. Total Structural Posts Equation: $$\mathbf{\text{Total Posts}} = \left\lceil (\text{Linear Footage})/(\text{Post Spacing (typically 8 ft))} \right\rceil + 1 + \text{Corners} + \text{Gate Posts}$$ For a 150-linear-foot perimeter with 8-foot spacing, 2 corner turns, and 1 walk gate: $$\text{Posts} = \left\lceil (150)/(8) \right\rceil + 1 + 2 + 1 = 19 + 4 = 23\text{ total posts}$$

2. Concrete Footing Volume: $$\mathbf{\text{Concrete Bags (50 lb)}} = \text{Total Posts} \times 2.0\text{ bags}$$ Each post hole should be dug to a minimum diameter of 3 times the post width (10 to 12 inches for a 4x4 post) and at least 24 to 36 inches deep to extend past local frost lines.


3. Gates, Hardware Kits & Site Access Economics

  • Walk Gates (3 to 4 ft wide): Costs $250 to $450 installed including self-closing powder-coated hinges, heavy-duty latch, and anti-sag turnbuckle cable.
  • Double Drive Gates (10 to 12 ft wide): Costs $600 to $1,200 installed. Requires heavy-duty 6x6 posts or 3-inch steel pipes to support the cantilevered rotational weight without sagging.
  • Old Fence Demolition & Disposal ($3.00 to $5.00 / ft): Tearing out an existing chain link or rotting wood fence, pulling out old concrete plugs, and municipal dump disposal fees add $450 to $750 on a 150-foot project.

4. Contractor Labor vs. DIY Savings

  • Contractor Labor ($10.00 to $16.00 / linear ft): Includes laser-transit layout, motorized two-man auger hole excavation, gravel drainage tamp at hole bases, plumb alignment, and pressure-treated rail fastening.
  • DIY Outlay: Saves $1,500 to $2,400 in direct labor, but requires renting a gas-powered post hole auger (~$90/day), concrete mixing tub/paddle (~$30/day), and hauling heavy lumber and 2,000+ lbs of concrete bags.

Frequently Asked Questions

How much does 150 linear feet of wood privacy fence cost in 2026?
A 150-linear-foot pressure-treated pine privacy fence (6 feet tall) costs approximately $4,500 to $5,200 installed by a licensed contractor, including 20 to 22 line posts, 40 to 44 bags of fast-setting concrete, one 4-foot walk gate, and all fasteners.
How many bags of concrete do I need per fence post?
For a standard 6-foot privacy fence using 4x4 or 5x5 posts, engineers recommend 1.5 to 2 fifty-pound bags (or 1 to 1.5 sixty-pound bags) of fast-setting concrete per hole. Sinking posts at least 1/3 of their total length (24 to 30 inches deep) prevents frost-heave and high-wind failure.
What is the cheapest fence material to install per linear foot?
Galvanized or black vinyl-coated chain link is the most cost-effective fencing option at $12 to $20 per linear foot installed, followed by pressure-treated pine wood ($18 to $26 per linear foot installed).

Ready to Model Your Numbers?

Our calculators run 100% in your browser. No registration required, zero data saved.

Launch Open Fence Cost Calculator