RESIDENTIAL & PROPERTY ESTIMATION ENGINE

Fence Cost Calculator

Estimate installed fencing costs per linear foot across wood privacy, vinyl, chain link, and aluminum with full bill of materials.

Fence Length & Material Selection

150 Linear Feet
ft
Pressure-Treated Pine (6 ft Privacy)

Budget-friendly, chemical-treated against rot and termites. Requires periodic staining.

$16.50/ftmaterials
Western Red Cedar (6 ft Privacy)

Naturally rot-resistant, aromatic, minimal warping, and premium architectural appearance.

$24.00/ftmaterials
Vinyl / PVC Privacy (6 ft)

Zero maintenance, never rots or requires painting. High resistance to UV weather fading.

$28.50/ftmaterials
Black Vinyl-Coated Chain Link (4 ft)

High visibility, maximum durability, weather-proof galvanized steel core.

$13.00/ftmaterials
Ornamental Aluminum (4-5 ft)

Elegant wrought-iron look with zero rust risk, powder-coated finish for pools and estates.

$34.00/ftmaterials

Labor & Site Preparation

Contractor vs DIY
ESTIMATED TOTAL COST$35.83 / linear ft
$5,375

Complete installed cost for 150 linear feet with Pressure-Treated Pine (6 ft Privacy).

Did this calculator solve your problem today?
Materials Subtotal:$3,275
• Fence Pickets / Panels:$2,475
• Concrete Footing Bags (42 bags):$273
• Gates & Hardware Kits:$527
Contractor Installation Labor:$2,100
Estimated Material Takeoff:
  • Line & End Posts:21 units
  • Fence Panels (or 8ft spans):19 spans
  • Fast-Setting Concrete (50 lb):42 bags
  • Gates (Walk / Drive):1 Walk / 0 Drive

Fencing Engineering & Cost Factors in 2026

Proper fence construction requires calculating not only the visible pickets or panels, but the structural below-grade post footings that withstand wind shear and ground frost heave.

Post Hole Depth Rule

Dig holes at least 1/3 of the total post length (or 6 inches below your local winter frost line). A 6-foot fence needs an 8-foot post sunk 24 inches into the ground.

Concrete Footing Anchor

Use 1.5 to 2 fifty-pound bags of fast-setting concrete per post. Bell out the bottom of the hole slightly to anchor the post securely against frost jacking.

Wind Resistance & Spacing

Solid privacy fences act as wind sails. In open wind exposure or coastal hurricane zones, reduce post spacing from 8 feet to 6 feet to prevent leaning.

The Engineering Takeoff Equations (Clean Unicode Math)

Post Count Formula:
Number of Line Posts = Ceiling(Linear Feet ÷ Post Spacing) + 1 + (Number of Corners) + (Gate End Posts)
Concrete Footing Volume:
Total 50-lb Concrete Bags = Total Posts × 2 Bags per Hole
Total Installed Fence Price:
Total Cost = (Linear Feet × Material Cost per Ft) + Concrete + Gates + Hardware + (Linear Feet × Labor Rate)

Frequently Asked Questions About Fence Installation

How long does pressure-treated pine vs cedar last?

Pressure-treated pine lasts 15 to 20 years with bi-annual power washing and sealing. Western red cedar lasts 20 to 25+ years and is naturally impervious to insects and rot. Vinyl lasts 30+ years with zero rotting.

Do I need a building permit to install a residential fence?

Most municipalities require a building permit for fences over 6 feet tall or for any pool safety barrier. Always contact 811 before digging to mark underground gas, power, and water utilities.