Construction & Remodeling Takeoff

Drywall Cost Calculator

Estimate drywall sheet counts, joint compound buckets, screws, tape rolls, and licensed contractor installation labor costs across all 5 finishing levels.

1. Room & Wall Dimensions

Include Ceiling Drywall

2. Openings & Waste Factor

3. Drywall Sheet Specifications

Panel Dimensions

4. Finishing Level & Labor

Two separate coats over flat joints and fasteners, feather edged and thoroughly sanded. Designed for standard flat/eggshill paint.

Estimated Total Project Cost
$2,439.75
Unit Rate

$3.29/sq ft

Materials (32%)Labor (68%)
Drywall Sheets

26 panels (4x8)

Net Surface Area

741 sq ft

Bill of Materials (BOM) Takeoff

1/2" Standard Gypsum Board (4x8)26 pcs • $403
Joint Compound (4.5 Gal Pails)9 pails • $220.5
Joint Tape (250 ft Rolls)2 rolls • $17
1-1/4" Coarse Drywall Screws6 lbs • $54
PVA Drywall Primer3 gals • $78
Installation & Taping Labor$1,667.25
Did this calculator solve your problem today?

How Drywall Installation Costs Are Calculated

Drywall estimating requires precise geometric quantification of wall perimeters and ceiling planes, adjusted for standard opening deductions (doors and windows) and scrap waste. Gypsum panel costs represent only 40%–50% of raw material expenditures—joint compound, fiberglass or paper tape, fasteners, and corner bead make up the remaining balance.

The 5 Levels of Drywall Finishing (GA-214 Standards)

LevelCoatings AppliedAvg Labor / Sq FtRecommended Application
Level 1Tape embedded in compound; tool marks remain$0.80 – $1.10Attics, plenum areas, concealed mechanical chases
Level 2Tape embedded + thin coat over joints and screw heads$1.20 – $1.50Garages, storage warehouses, substrate for ceramic tile
Level 3Tape + 2 separate coats on joints; sanded smooth$1.60 – $1.90Walls receiving heavy knockdown, popcorn, or thick wallpaper
Level 4 (Standard)Tape + 3 coats feather-edged; full sanding$2.00 – $2.50Standard residential walls receiving flat, satin, or eggshell paint
Level 5 (Premium)Level 4 + thin skim coat covering 100% of wall surface$3.00 – $4.00High-end architecture, gloss paints, surfaces under critical sidewall lighting

When to Choose 4x8 Sheets

Standard 4×8 panels weigh approximately 50 lbs each in 1/2" thickness. They fit inside residential elevators, standard pickup truck beds, and tight stairwell turns. Recommended for solo DIY projects or smaller rooms with frequent architectural cutouts.

When to Choose 4x12 Sheets

4×12 panels reduce vertical butt joints by up to 25%, producing a flatter wall with fewer taped seams. However, each board weighs roughly 75 lbs and requires at least two workers or a mechanical drywall lift to hang safely without cracking.

Need comprehensive cost benchmarks by city and square footage?

Read our in-depth 2026 Drywall Cost Per Square Foot Guide for detailed material breakdown and contractor pricing.

Read Cost Guide

Related Financial Tools

Interconnected calculations to validate your business economics

View all 177 models →